Stanton SCS.4DJ Quick Start Manual

SCS.4DJ :: QUICK START GUIDE
FX CONTROLS
LOOP CONTROLS
PLATTER CONTROLS
MIC CONTROLS MASTER CONTROL
POWER
NAVIGATION AND MENU CONTROLS
DECK B
DECK A
CROSS FADER
MIXER CONTROLS
MIXER CONTROLS
MASTER METER
& RECORD
USB PORT 2 MASTER OUTPUT
USB PORTS 3 & 4
(INSIDE BOTTOM PANEL)
USB PORT 1
HEADPHONE CONTROLS
KENSINGTON™ LOCK
A. BEFORE YOU START
Firmware updates will ensure your SCS.4DJ includes the lastest
features and improved functionality.
You must analyze your music files to utilize the following:
• Multicolored Waveforms
• BPM detection
• BPM driven effects
• SYNC
• Looping
• Auto DJ
Our offline analysis tool,
users with large libraries or those who wish to analyze their files
PITCH CONTROLS
faster.
The SCS.4DJ defaults to a demo video. To disable the demo mode
press SYSTEM before the countdown clock ends.
For updates, videos, and more visit:
B. GET CONNECTED
1. Connect power supply to SCS.4DJ and secure cable with fastener.
2. Connect speaker cable to MASTER OUTPUT (RCA or ¼" ).
3. Power on SCS.4DJ and connect USB device (thumb/hard drive).
TRANSPORT CONTROLS
C. MY FIRST MIX
1. Press BROWSE and load a track to each deck. You can select
your tracks with the jog wheel, and use the Load A/Load B buttons
to load your tracks.
2. Press PLAY on deck A then press PLAY on deck B.
3. Press SYNC on either deck and use the crossfader to mix
between decks.
QuickGrid is avaliable to download for
www.stantondj.com/scs4dj