To access the SmartDisplay on your device via Client mode connection, do the following:
Plug in the Wi-Fi Dongle
(Wi-Fi dongle is an optional accessory)
Select [Settings]
Enter AP Mode Page.
Select [ON] to enable the
function.
Enter the password. Then select
OK to save the settings.
Enter Home Menu
Select [WiFi]
COLOR
MENU/
EXIT
AUDIO
Configure the settings.
Then select OK to save the
settings.
COLOR
MENU/
EXIT
AUDIO
/ / / : Select item
Enter
28
COLOR
MENU/
EXIT
AUDIO
Select [Client Mode]
COLOR
MENU/
EXIT
AUDIO
Enter
Select the device to connect. Be
sure to enable Hotspot function
of your mobile device.
COLOR
MENU/
EXIT
AUDIO
/ / / : Select item