Connection To Your Pc - Olympus DS-2300 Instructions Manual

Connection to Your PC

Be sure to install the DSS Player software before connecting the recorder to a PC.
You can directly connect the recorder's USB terminal to your PC.
Connecting to your PC Using the USB
Cable
1
Turn ON the recorder ( P.12).
2 Insert end A of the USB cable to
your PC's USB port or USB hub.
3
Make sure the recorder has
stopped before attaching end b
of the USB cable to the terminal
port of the recorder.
If "REMOTE" is displayed on the
recorder, it indicates proper
connections.
Once you connect the recorder to your PC, the recorder will
be powered through the USB cable. The batteries will not
be in use.
Windows
When the recorder is connected and "My Computer" is
opened, a removable disk drive is displayed. If "Add New
Hardware Wizard" appears, cancel the wizard by pressing
the [Cancel] button and then install DSS Player.
Macintosh
If the recorder is connected to Mac OS, an icon with a drive
name of "Untitled" appears.
4
REMOTE
REMOTE
39