Disassembly; Door; Door Switch; Refrigerator Room Lamp - LG GB7143**AV Series Service Manual

DISASSEMBLY

1. DOOR

Freezer Door
1) Refer to previous chapter "Instruction for Reversing
Door Swing".
2) Pull out the Door Gasket to remover from the Door
Foam Assembly, F.
Refrigerator Door
1) Refer to previous chapter "Instruction for Reversing
Door Swing".
2) Pull out the Door Gasket to remove from the Door
Foam Assembly, R.

2. DOOR SWITCH

1) Unplug the power cord from the outlet.
2) Loosen six screws in upper part and disconnect Top
Cover Front.
3) Disconnect Lead Wire from switch.
4) Disengage hook behind the switch by pressing it with
hands.

3. REFRIGERATOR ROOM LAMP

1) Unplug the power cork the outlet.
2) Remove all of the fridge compartment,
(Involved removable glass shelf, wine rack etc.)
3) Remove one screws in Case, Control Refrigerator.
4) Pull out the Grille Fan and Case, Control Refrigerator.
5) Disconnect the Housing of lead wire.
6) Replace new one.
7) Assembly in reverse order of disassembly.
GASKET
8) Replacement LED must be the same specification as
original.
Figure 7
Don't touch the LED, in case of light on the long time.
Because it can be very hot.
LED capacity is MAX 8W (GB7138**** MODEL : 6W).
The LED will remain "ON" for 7minutes if the door is left
open and then it is "OFF" for safety.
(If you reopen the door, the lamp is "On".)
Figure 9
- 13 -
Figure 10