Installation; Introduction To P-Link Nano; Product Description - Tele System P-Link Nano User Manual

2 Installation

2.1 Introduction to P-Link Nano

P-Link Nano is an high-performace powerline adapter. The data rate (up to 200 Mbps) make this device suitable
to applications that can use intensively your broadband network connection. Both at work and at home, devices
like digital receivers, set-top boxes or PCs can be connected to P-Link Nano by using ethernet interface. Moreover
the communication between 2 P-Link Nano can cover a distance up to 300 meters allowing the user to extend its
broadband connection without the need of wiring.
Which is the main function of powerline adapters? With these devices you can configure a network in a fast, secure
and cheap way without the need of wiring. The powerline adapters can reach speed comparable (often faster) than
other LAN tecnologies. The installation procedure is plug&play, without any software to be installed and, in addition,
P-Link Nano has a low-power consumption mode: it can reduce its power consumption by switching automatically to
stand-by mode if no adapter is used.

2.2 Product Description

1. LED for PWR: steady green when the device is fully operative; blinking green if the device is in stand-by mode.
2. LED for LAN network : steady green when the network connection is active, blinking green if data are
transmitted
3. LED for PLC connection: green when the connection (with another P-Link Nano) is established.
4. SECURITY button: you can start data protection by pressing this button; in order to have more information
about the usage of this button, please refer to section2.4.1.
TELE System
3