Listing Files - Applied Engineering Sirius IIGS User Manual

Internal hard drive
Table of Contents

Advertisement

PLEASE SELECT AN OPTION
4)
Press "M" to select BACKUP MODIFIED FILES.
SELECT AN OPTION OR <ESC>:
5) At the BACKUP FROM prompt, type in a slash followed
by the name of your Vulcan partition. Ex:
BACKUP FROM --
(/VULCAN1
6) Press <return>.
7)
At the TO THE DEVICE
number of your floppy drive (usually "5" for 3.5" and
"6" for 5.25").
8)
Now type in the drive number of your floppy drive
(usually 1, if you're booting from a RamKeeper
however, the 3.5" drive number will be 2).
9)
Press <return>.
10) Select where to output the file list;
*
Note: We recommend keeping a printed list of the
disks contents if you're able.
Press <return> to send the list to the screen only
Press P-<return> to send the list to the printer and
screen if you have a printer connected.
Backup II will then begin the backup procedure. The program
will tell you which disk it is currently backing up as well as how
many total disks it needs.
11) While the program is copying one disk, write the label
of the next (/MOD2 (date), /MOD3 (date)).

Listing Files

To get a printout of the backup disk contents at any time, follow
these steps:
B — BACKUP FILES
R — RESTORE FILES
Q - QUIT
M — BACKUP MODIFIED FILES
P - BACKUP BY PATHNAME
prompt, type in the slot
--
Oh. 5 - Backing Up the Vulcan
39

Advertisement

Table of Contents

Troubleshooting

loading
Need help?

Need help?

Do you have a question about the Sirius IIGS and is the answer not in the manual?

This manual is also suitable for:

Vulcan

Table of Contents

Save PDF