Panasonic LUMIX DMC-LZ40 Operating Instructions Manual page 42

[Monitor Display]
•
Some subjects may appear differently from actuality on the monitor. However, this does not affect
the recorded pictures.
•
When [Monitor Luminance] is set to [High Angle], [Brightness] and [Contrast · Saturation] cannot be
adjusted.
[Monitor Luminance]
•
[High Angle] is also cancelled if you turn the camera off or [Auto Power Off] is activated.
•
The brightness of the pictures displayed on the monitor is increased so some subjects may appear
different from real life on the monitor. However, this does not affect the recorded pictures.
•
When [Monitor Luminance] is set, the usage time is reduced.
Brightness, colour, or red or blue tint of the monitor is adjusted.
[Brightness]:
Adjust the brightness.
[Contrast · Saturation]:
Adjust the contrast or clarity of colours.
[Red Tint]:
Adjust the red tint.
[Blue Tint]:
Adjust the blue tint.
1
Select the settings by pressing 3/4, and adjust with 2/1.
2
Press [MENU/SET] to set.
These menu settings make it easier to see the monitor when you are in
bright places or when you are holding the camera high above your
head.
[„] ([Auto Power Monitor])
The brightness is adjusted automatically depending on how bright it is
around the camera.
[...] ([Power Monitor]):
The monitor becomes brighter and easier to see even when taking
pictures outdoors.
¢
[Å] ([High Angle])
The monitor is easier to see when taking pictures with the camera held
high above your head.
[OFF]
¢ Can be set only when Recording Mode is set.
Basic
¢ :
:
- 42 -