TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the E.Capacitor on the Frame Unit ---------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1.
1 Safety Precautions 1.3. Leakage Current Hot Check (See Figure 1.) 1.1. General Guidelines 1. Plug the AC cord directly into the AC outlet. Do not use 1. IMPORTANT SAFETY NOTICE an isolation transformer for this check. There are special components used in this equipment 2.
1.4. How to Discharge the E.Capacitor on the Frame Unit CAUTION: 1. Make sure to discharge the E.capacitor on the Frame Unit. 2. Be careful of the high voltage circuit on the Frame Unit when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and remove the necessary parts/unit. 2.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).
This manual is also suitable for:
Lumix dmc-lz40pcLumix dmc-lz40puLumix dmc-lz40prLumix dmc-lz40egLumix dmc-lz40epLumix dmc-lz40ef...
Show all