[Burst] - Panasonic LUMIX DMC-LZ40 Operating Instructions Manual

Operating instructions for advanced features
Hide thumbs Also See for LUMIX DMC-LZ40:
Table of Contents

Advertisement

[Burst]

Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
Settings
[˜]
([Burst On])
[
] ([Hi-Speed Burst])
[OFF]
¢ The number of Burst recording pictures are limited by the picture-taking conditions and the type
and/or status of the card used.
Recording
Description of settings
Burst speed
The burst speed becomes slower halfway.
The exact timing of this depends on the type of card
and the Picture Size.
Burst speed
This can be set only during Programme AE Mode.
The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M
(16:9) or 2.5M (1:1).
The Burst speed changes according to the recording
conditions.
The number of Burst recording pictures are limited by
the picture-taking conditions and the type and/or
status of the card used.
The number of Burst recording pictures may increase
when you use a card with fast writing speed or card is
formatted.
The ISO sensitivity is automatically adjusted.
However, the ISO sensitivity is increased to make the
shutter speed become high-speed.
- 84 -
approx. 1.1 picture/second
approx. 3 pictures/second
Maximum
recordable
pictures
(pictures)
Approx.
200 pictures
¢
Approx.
¢
200 pictures

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-lz40

Table of Contents