Icons & Symbols - Philips Xenium X810 Manual

Icons & symbols
In idle mode, several symbols can be displayed
simultaneously on the main screen.
If the network symbol is not displayed, the
network is currently not available. You may be
in a bad reception area; moving to a different
location may help.
Silent - Your phone will not ring when
receiving a call.
Vibration only
when there is an incoming call.
Battery - The bars indicate the battery level
(4 bars=full, 1 bar=low).
SMS - You have received a new SMS
message.
MMS message
multimedia message.
Wap message - You have received a Wap
push message in the message inbox.
Missed call - You have a missed call.
Call divert - All your incoming voice calls
are being forwarded to a number.
56
- The phone will vibrate
- You have received a new
Bluetooth feature is activated.
The Bluetooth headset is connected.
Headset - The headset is plugged into the
phone.
Alarm - The alarm clock has been
activated.
Roaming - Displayed when your phone is
registered to a network other than your
own (especially when you're abroad).
Home zone - A zone designated by your
network operator.
dependent, contact your service provider
for details.
GSM Network - your phone is connected
to the GSM network.
Reception quality - the more bars are
shown the better the reception is.
GPRS attach - Your phone is connected to
the GPRS network.
EDGE attach - Your phone is connected to
the EDGE network.
Firewall - You have turned on the firewall.
Subscription
Icons & symbols