Table of Contents
Advertisement
Operation
Installing the dusting sheet for use in dusting mode
WARNING: to reduce the risk of injury from moving parts – turn power o (0=o ) and unplug charger
before installation and removal/replacement.
Stoppers
Dusting sheet
Place the dusting sheet on a at
surface then centre the dusting
sheet holder on the sheet (side with
4 stoppers facing upwards). Remove
the 4 stoppers from their recesses.
Press the 2 bolts of the dusting
paper holder into the 2 holes on the
underside of the robotic sweeper.
Ensure the dusting sheet is facing
upwards (when the robotic sweeper
is in the upside down position).
9
Fold back
Press
6
Recess for
the stopper
Fold back the hem of the dusting
sheet on the two longest sides to the
dusting holder. Place the 4 stoppers
on top of the dusting sheet, then
press them rmly into the recesses
- xing the dusting sheet to the
dusting sheet holder.
Lift up
2
To remove and replace the
dusting sheet, lift up dusting sheet
holder from the underside of the
robotic sweeper.
5
Press
4
2
Press
1
Fold back
3
Press
1
Push to
the left
Vax Careline:
Place this underside of the dusting
sheet holder with dusting sheet on
the robotic sweeper.
AU: 1300 361 505
NZ: 0800 800 900
Advertisement
Table of Contents
