Installing The Sim/Sam Cardholder Compartment Cover - Lipman NURIT 8000 Installation Manual

Wireless palmtop solution
Hide thumbs Also See for NURIT 8000:
Table of Contents

Advertisement

Installing the SIM/SAM Cardholder
Compartment Cover
After installing the SIM/SAM card(s), you can
cover the cardholders with the supplied plastic
cover. You can also protect this cover from being
opened by sticking the included void label over
the cutout in the cover.
To install the SIM/SAM cardholder
compartment cover:
1.
2.
3.
4.
5.
Installation Manual
SanDiegoMerchantServices.net 858-335-2992
Carefully hold the terminal facedown or
place it on a soft, smooth surface so as not
to damage the LCD touch screen.
Press and lift the locking tab on the
battery pack to release it from the
compartment.
See Figure 8
Battery Pack Removal
Remove the battery pack from the
terminal.
Insert the two square tabs at the top of the
plastic cover beneath the upper wall of the
SIM/SAM cardholder compartment.
Press down on the bottom of the cover
until the two tabs snap into place under
the lower wall of the SIM/SAM cardholder
compartment.
.
43

Advertisement

Table of Contents
loading

Related Products for Lipman NURIT 8000

Table of Contents