Table of Contents
Advertisement
Quick Links
WDR Camera Series
P/N : 3810-0023R
(Ver.0705E)
Design and specifications
are subject to
change without notice.
. User Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Explanation of two Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance-(servicing) instructions in the
literature accompanying the appliance.
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE
ON THE BOTTOM OF THE SYSTEM.
"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE"
2
COLOR VIDEO CAMERA
Color Video Camera Series
Day & Night Color Camera
Day & Night Color Camera
3 x
3 x
480
TVL
DIGITAL CAMERA SERIES
COLOR VIDEO CAMERA
OWNER'S MANUAL
OSD
OSD
On-Screen Display
INFORMATION
This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at their own expense.
WARNING
The manufacturer could void the user's authority to operate the
equipment.
CAUTION - To prevent electric shock and risk of fire hazards:
Do NOT use power sources except for that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person
and should abide to all local codes.
WDR
WDR
Digital Zoom
Digital Zoom
3
COLOR VIDEO CAMERA
Advertisement
Table of Contents
Related Manuals for Digital Equipment .WDR Camera Series
Summary of Contents for Digital Equipment .WDR Camera Series
-
Page 1: User Information
This equipment has been tested and found to comply with limits for a RISK OF ELECTRIC SHOCK DO NOT OPEN Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against CAUTION! -
Page 2: Model Description
. Contents 1. Model Description Thank you for purchasing this COLOR VIDEO CAMERA. Before operating the camera, confirm that you have the right camera model and proper power voltage. Model Description In order to help you understand this manual, we'll introduce our model's description. - Page 3 SONY CCD, which provides clean, noiseless and reliable pictures. 4. Fine Picture Condition Under Very Low Illumination (Sense up) 1/3 high density CCD and digital processor permit high quality pictures to be captured in very low light condition. 5. VIDEO/ MANUAL/ DC Lens Selectable The camera accepts 3 types of lenses (VIDEO/ MANUAL/ DC) and is set with the VIDEO/ ELC/ DC selection switch.
- Page 4 6. Connection 3. Remove the cover from the iris lens plug supplied, and solder the lens cable to the plug as shown below. LENS Pin.No. VIDEO TYPE DC TYPE The lens is not supplied with this camera. Purchase a lens suitable RED (Power Source) --- Damping - for your environment.
-
Page 5: Connecting To Power
Connecting to Power For AC 24V / DC 12V Power Type Each model has different power specification, please check the name of the model and power specification before connecting to power source. The wire is non-polarized. Please refer to the sticker identifying the model, which is attached on the Use AC 24V power source or DC 12V power source. -
Page 6: Cable Connection
7. Remote Controller Operation (Pelco-D) Cable Connection Pelco-D/ RS-485 The remote controller is optional item. Receiver RS-485 Signal Power Receiver & DC 12V, 500mA Remote Control - White Terminal : - Black Terminal : Remote Control ¨ç Camera Selection - After camera connects with receiver, ¨ç... -
Page 7: Setting Up The Menu
Main Menu- GENERAL Press the MENU button to access the GENERAL mode. MENU AREA 1 ~ 4 PRIVACY MASK ON, OFF START X MENU END X GENERAL GENERAL START Y CAMERA ID END Y ZONE LABEL INITIAL ON, OFF D & N NEGA / POSI EXIT SHARPNESS... - Page 8 Main Menu- AE Main Menu- D & N Press the MENU button to access the AE mode. Press the MENU button to access the D & N mode. D & N BRIGHTNESS D/N MODE AUTO FLICKERLESS LEVEL SHUTTER SPD NORMAL FILTER DLY AGC MAX SET INITIAL...
- Page 9 10. Troubleshooting Main Menu- DISPLAY Press the MENU button to access the DISPLAY mode. If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an DISPLAY authorized technician.
- Page 10 10. Specifications - AC 24V Input Model DAY & NIGHT / WDR WDR ONLY Model High Resolution Model High Resolution Signal System NTSC Signal System NTSC CCD Pick-up Element 2 : 1 Interalce Transfer 1/3 inch Double Scan CCD CCD Pick-up Element 2 : 1 Interalce Transfer 1/3 inch Double Scan CCD Effective Pixels 768(H) x 494(V)
Need help?
Do you have a question about the .WDR Camera Series and is the answer not in the manual?
Questions and answers
How clear sd memory card wdr