Oki C610n Maintenance Manual page 118

Oki Data CONFIDENTIAL
Category Item Setting value
Storage Check File Execute
Setup System
Check All Execute
Sectors
Enable SD No
Card
Yes
Erase SD Execute
Card
Enable No
Initialization
Yes
Power Peak Power Normal
Setup Control
Low
Power Save Enable
Disable
Sleep Enable
Disable
USB Host Off
Power
On
Language Language Execute
Setup Initialize
44205301TH Rev.1
Function
Resolves the un-match between the actual (free)
space and displayed free space of file system, and
recovers the control data (FAT information.)
Recovers the SD Memory Card sector information
defect and un-match of the above file system.
A printer can start up even if SD Memory Card
cannot start as it is damaged when it is installed,
by setting "No" regardless of the SD Memory Card
installation as a printer recognizes that SD Memory
Card is not installed.
Deletes all data stored in a SD Memory Card so that
the data cannot be recovered.
It is displayed when the optional internal SD Memory
Card is installed.
The internal SD Memory Card and flash memory
are set so that they cannot be changed including
initialization.
Sets Yes/No of low peak power control.
Setting Valid/Invalid of the save power mode.
Sets Enable/Disable of Sleep Mode.
Sets the power supply provided for a USB host in
the Power Save mode.
Off reduces the supply of power.
On provides normal supply of power.
Deletes the message file in a flash memory.
5. Maintenance Menu
118 /