Table of Contents
Advertisement
Quick Links
AUDIO RECORDER INSTRUCTIONS
• Install two AA batteries in the recorder's rear
sliding compartment. An on-screen indicator
will display the battery level.
• Insert a microSD card facedown into the right
side panel until it clicks into place.
• To turn on the recorder, press Home for about
two seconds.
• To prepare to record, press Record. The recorder
will enter standby mode. Write down the file
name of the recording for reference.
• With the recorder in standby mode, set the input
level to "auto." From the home screen, press
Quick, select "level control," then press Play.
Press + and − to select "auto levels," then press
Play. An icon in the upper-left
corner of the display will
indicate that the recorder is
in auto level mode.
Advertisement
Table of Contents
Related Manuals for Tascam AUDIO RECORDER
Summary of Contents for Tascam AUDIO RECORDER
- Page 1 AUDIO RECORDER INSTRUCTIONS • Install two AA batteries in the recorder’s rear sliding compartment. An on-screen indicator will display the battery level. • Insert a microSD card facedown into the right side panel until it clicks into place. • To turn on the recorder, press Home for about two seconds.
- Page 2 • Place the recorder as close to the subject as possible, with one microphone facing him or her and one facing you. Eliminate background noise if possible. • Press + and − to adjust the volume. • To begin recording, press Record again. The red indicator will light continuously.
Need help?
Do you have a question about the AUDIO RECORDER and is the answer not in the manual?
Questions and answers