Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Use and Care Manual
Advertisement
Table of Contents
Related Manuals for Dacor RNCT304
Summary of Contents for Dacor RNCT304
-
Page 1: Installation Instructions
Installation Instructions Induction Cooktop Models: RNCT304 and RNCT365 Part No. 107240 Rev. C... -
Page 2: Table Of Contents
If you have questions or problems with installation, contact • The product data label contains the model and serial your Dacor dealer or the Dacor Customer Service Team. number information and the electrical requirements. For repairs to Dacor appliances under warranty call the •... -
Page 3: Important Safety Instructions
(including above ating this or any other appliance. and below the cooktop). • Always contact the Dacor Customer Service Team WARNING about problems and conditions that you don’t under- stand. See Customer Service Information. -
Page 4: General Safety Precautions
After use, make sure these surfaces have had suffi- off power to the cooktop. Dacor is not responsible for cient time to cool before touching them. the cost of correcting problems caused by improper • Do not wear loose or hanging apparel while using the... -
Page 5: Installation Specifications
36 ” 28” (91.4 cm) 19 ” (72.4 cm) (48.3 cm) 21 ” (53.3 cm) Model RNCT304 34” (86.4 cm) 19” (48.3 cm) 21 ” (53.3 cm) Model RNCT365 Chassis depth is 1/2” wider/deeper at base of glass cooking surface assembly. -
Page 6: Planning The Location
To reduce the risk of personal injury and to reduce accu- • Installation above a drawer is not recommended. mulated smoke in the room, Dacor strongly recommends Empty space below is required for installation and ven- installing a range hood. Install the range hood according tilation. -
Page 7: Cabinet Cutout Dimensions
Note 5 Cabinet Clearances Model RNCT304 30” (76.2 cm) 28 3/4” (73.0 cm) RNCT365 36” (91.4 cm) 34 3/4” (88.3 cm) 30 inches minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet or A = 24 inches minimum when the bottom of wood or metal cabinet is protected by not less than 1/4 inch thick flame retardant material covered with not less than #28 gage sheet steel, .015 inch thick stainless steel, .024 inch thick... - Page 8 2 3/4” 3/8” ERV30[15]/PRV30 vent (57.2 cm) (7.0 cm) (1.0 cm) 28 3/4” 27 3/4” (73.0 cm) (70.5 cm) RNCT304 cooktop with RV30 22 1/4” 2 1/2” 5/8” downdraft vent (56.5 cm) (6.4 cm) (1.6 cm) RNCT365 cooktop with 22 1/2”...
-
Page 9: Installation Instructions
• Foam tape • Hold down brackets (2) • Glass scraper (PN 82499) • Dacor Cooktop Cleaning Creme (PN A300) • Product literature Chassis Installation Hold down bracket and screws Hold Down Bracket Installation - Side View WARNING Electrical Connection If the electrical service provided does not meet the speci- fications on page 3, do not proceed with installation. - Page 10 Installation Instructions Three Wire Electrical Connection Incoming power IMPORTANT: No white wire connection is required for this Wire nut, 3-wire appliance. If there is an existing neutral (white) wire Junction 3 places in the junction box, you must shield it for compliance with the National Electrical Code.
-
Page 11: Verifying Proper Operation
Read the accompanying use and care manual completely ◊ Repeat the above tests. before using the cooktop. ◊ If the appliance still does not work, contact Dacor 1. Remove all items from the cooktop. Remove any tape Distinctive Service at (800) 793-0093 ex. 2822. Do that may be attached to the cooktop. - Page 12 Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.com...
Need help?
Do you have a question about the RNCT304 and is the answer not in the manual?
Questions and answers