Hi Power Cooking - Kenmore 99721 Use And Care Manual

HI POWER COOKING
I. Touch CLEAR, and a beep tone will be heard.
The CLEAR erases all previous settings.
2. Touch TIME. The Lights above TIME and below
STAGE 1 will go on. ("0" will show in the Display
Window.)
3. Touch Numbers for Cooking Time.
Set the cook time by touching the suitable numbers on
the Control Panel. For example, to set 30 seconds, you
would touch "3" and then "0". For 3 minutes, touch "3"
and then touch "0" twice. For 3_,_ minutes, touch "'3".
"3" and "0". (Note: Remember, the timer is a digital
clock that is divided into 60 seconds. So i,/_minute is
equal to 30 seconds. Touch-30 not 50 as with a
calculator.) The time set will show in the Display Window
at the top of the Control Panel.
Note: It is not necessary to touch COOK CONTROL
when cooking with highest power ("HI"). However. if
COOK CONTROL is touched, the Light above COOK
will go on and the word "HI" will show in the Display
Window. This is to tell you that the oven will be running
on "HI'" power unless a different power setting is chosen,
4. Touch START. The oven will begin cooking, and the
Display Window will show the time counting down by
seconds. A tone sounds for two seconds when the
time is up, and the oven shuts itself off,
Note: To stir food during cooking, open oven door, stir
or turn food. close oven door and touch START. Oven
will count down the amount of time left on the timer.
Example: Fresh fish can be quick-cooked on "HI" (max
power) for 6 minutes. Here is the procedure:
I. Touch CLEAR.
2, Touch TIME,
F
3. Set 6 minutes by touching "6",
then '0" twce. "600" will show in
the Display Window.
1"7 /'1
i..i t. .....
r
4. Touch START. The oven begins
cooking and the time shows
counting down in the Display
Window. A tone sounds for two
seconds when the 6 minutes are
up, and the oven shuts itself off.
{ gg
! S_a_e