Chrysler 1500 Owner's Manual page 308

306 UNDERSTANDING YOUR INSTRUMENT PANEL
• Five Second Unstored Messages
When the appropriate conditions occur, this type of
message takes control of the main display area for five
seconds and then returns to the previous screen. An
example of this message type is "Automatic High Beams
On".
Fuel Filter Life Reset
The cluster will display the "Fuel System Service Re-
quired – See Dealer" or "Service Fuel Filter" message
when the fuel filter maintenance life is less than 5%. To
verify if this is a fuel filter change event, go to the "Fuel
Filter Life" screen in the "Vehicle Info" menu. When this
message appears, dealers should replace both frame
mounted and engine mounted fuel filters.
NOTE: Use the steering wheel EVIC controls for the
following procedure(s)
Vehicles Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine.)
2. Press and release the DOWN arrow button to scroll
downward through the main menu to "Vehicle Info".
3. Press and release the RIGHT arrow button to access
the "Fuel Filter Life" screen.
4. Press and release the DOWN arrow button to select
"Reset", then press and release the Right arrow button
to select reset of the Fuel Filter Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, cycle the ignition to
the ON/RUN position (do not start the engine.)