Virgin Mobile USB modem User Manual page 9

3. Installing the connection software
Software installation for Windows
• Make sure the Modem is powered on.
• A fter connecting the Modem's USB cable to your computer, the set-up software will run automatically.
• I f the software does not run automatically, go to "My Computer", which should be located on
your Windows desktop, and browse to the disk drive labelled "VIRGINMOBILE". Double-click on
"Autorun.exe", to start the installation program
1. Choose 'Install' and then click 'Continue'.
2. P lease read, and agree to, the Software Licence Agreement and leave the installation directory
unchanged. The software will start installing and a progress screen will be displayed.
3. Once the software and drivers have installed, click 'Finish'.
4. Y our computer will now use the new software to properly configure your modem. An information
balloon will pop up from your System Tray when the process is finished. This may take several
minutes.
5. When the install is finished the Virgin Mobile connection software will start.
6. Click 'Connect'. Open your Internet browser (e.g. Internet Explorer).
7. You are now connected to the Internet and ready to start surfing!
If you'd prefer step by step instructions with some handy images for reference, visit our online FAQ's:
virginmobile.custhelp.com
9