1. Manuals
  2. Brands
  3. PTZ Optics Manuals
  4. IP Camera
  5. 20X-USB
  6. User manual

PTZ Optics 20X-USB User Manual

3.0 hd video conferencing camera
Hide thumbs Also See for 20X-USB:
Table of Contents

Advertisement

Quick Links

Download this manual
PTZ Optics 20X-USB
User Manual
V1.0
(English)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20X-USB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PTZ Optics 20X-USB

Summary of Contents for PTZ Optics 20X-USB

  • Page 1 PTZ Optics 20X-USB User Manual V1.0 (English)
  • Page 2 Preface Thanks for using this USB3.0 HD Video Conferencing Camera. This manual introduces the function, installation and operation of the HD camera. Prior to installation and usage, please read the manual thoroughly. Precautions This product can only be used in the specified conditions in order to avoid any damage to the camera: n...

  • Page 3: Table Of Contents

    Contents 1、 Note ································································································ 3 2、 Supplied Accessories ············································································· 4 3、 Quick Start ························································································· 5 4、 Features ···························································································· 8 5、 Product Specification ············································································ 9 6、 Main Unit ························································································ 11 7、 IR Remote Controller Explanation ··························································· 12 8、 Use IR Remote Controller ····································································· 14 9、...

  • Page 4: Note

    Note l Electric Safety Installation and operation must accord with electric safety standard. l Caution to transport Avoid stress, vibration and soakage in transport, storage and installation. l Polarity of power supply The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power supply plug drawing as follows.

  • Page 5: Quick Start

    Quick Start Step1. Please check connections are correct before starting Step2. Setting switches Set both of the switch1 and switch2 to "OFF'. That is "Normal Working Mode". SW-1 SW-2 Modes Normal Working Mode...
  • Page 6 Step3. Setting of the system select switch The option of video format: VIDEO SYSTEM 1080i60 1080i50 720p60 720p50 576i 1080p30 480i 1080p25 CAUTION: a. After changing the switch, you need to restart the camera to take effect. Step4. Press the Switch ON/OFF button on the rear of the camera, the power lamp light. Step5.

  • Page 7: Features

    RESTORE DEFAULT Restore Change Value [Home] OK [Menu] Back Features 1. Support USB3.0 transmission, the highest rate up to 5Gbps, ensure real-time lossless HD data transmission. 2. Support HD USB3.0,HD-SDI(optional),Network stream, three-stream simultaneous output, compatible with CVBS. 3. Adopt Panasonic's 1/3 inch, 2.12 million pixels high quality HD CMOS sensor, which can realize maximum 1920 x 1080 high resolution image with high quality, maximum output frame rate reach 30 frames per second.

  • Page 8: Product Specification

    Product Specification Model 20X-USB Name PTZ Optics USB3.0 Type HD Color Video Camera Camera 1080i/60,1080i/50, 1080p/30, Sub stream Video System 1080p/25, 720p/60, 720p/50, 640x360,320x180 resolution NTSC, PAL 128K,256K,384K,512K,768K,1024 1/3", CMOS, Total Pixel: 2.2M, K,1536K,2048K,3072K,4096K, Sensor Rate Effective Pixel: 2.12M 5120K,6144K,8192K Optional,...
  • Page 9 1xRS-232 IN: 8pin Min DIN, Max Horizontal Rotation ±170° Distance: 30m, Protocol: VISCA/ Range Pelco-D/Pelco-P Control Input/Output 1xRS-485: 2pin phoenix port, Vertical Rotation -30° ~ +90° Max Distance: 1500m, Protocol: Range VISCA/Pelco-D/Pelco-P JEITA type (DC IN 12V) Pan Speed Range 1.7°...

  • Page 10: Main Unit

    Main Unit 1. Audio LINE IN Interface 7. RS232 IN jack 2. Audio LINE OUT Interface 8. RS232 OUT jack 3. CVBS Interface 9. Network 4. Dip switches 10. USB3.0 5. System select switch 11. DC 12V jack 6. RS485 jack 12.

  • Page 11: Ir Remote Controller Explanation

    IR Remote Controller Explanation 0. Standby Button Press this button to enter standby mode. Press it again to enter normal mode. (Note: Power consumption standby mode approximately half of the normal mode) 1. Position Buttons To set preset or call preset 2.
  • Page 12 Press [AUTO] adjust the focuses on the center of the object automatically. To adjust the focus manually, press the [MANUAL] button, and adjust it with [Focus＋] (Focus on far object) and [Focus－] (Focus on near object) 6. Camera Select Buttons Press the button corresponding to the camera you want to operate with the remote controller.

  • Page 13: Use Ir Remote Controller

    USE IR Remote Controller When the camera is working, you can use remote Press and hold the up/down/left/right button, the controller to perform panning, tilting, zooming and camera will keep rotating from slow to fast, until it run to focusing, store and call back preset positions. the mechanical limit;...
  • Page 14 3. Focus Control Focus Far: Press [FOCUS+] button (NOTE: Effective only in manual focus mode) Focus Near: Press [FOCUS-] button (NOTE: Effective only in manual focus mode) Press and hold the button, the action of focus continues 1. To store a preset position: The users should press and stops as soon as the button is released.
  • Page 15 7. Camera Selection Press the button corresponding to the camera you want to operate. Press any of the numeric buttons 0-9 directly to recall stored preset positions and settings. 8. Camera IR Address Set Note: No action is executed if a relative preset position is not stored.

  • Page 16: Rs-232 Interface

    RS-232 Interface Camera Windows DB-9 1.DTR 1.CD 2.DSR 2.RXD 3.TXD 3.TXD 4.GND 4.DTR 5.RXD 5.GND 6.GND 6.DSR 7.IR OUT 7.RTS 8.NC 8.CTS 9.RI Camera Mini DIN Function 1.DTR 1.DTR 2.DSR 2.DSR 3.TXD 3.TXD 4.GND 4.GND 5.RXD 5.RXD 6.GND 6.GND IR OUT 7.IR OUT 7.NC 8.NC...

  • Page 17: Serial Communication Control

    Serial Communication Control In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface. RS232   C ommunication   C ontrol   Ø The camera can be controlled via RS232 ,the parameters of RS232C are as follows: Baud rate: 2400/4800/9600 bit/s.
  • Page 18 The camera can be controlled via RS485, Half-duplex mode, supports VISCA or Pelco-D or Pelco-P protocol, supports the following configurations: Baud rate: 2400/4800/9600 bit/s. Start bit: 1 bit. Data bit: 8 bits. Stop bit: 1bit. Parity bit: none. Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center, the process of initialization is finished.
  • Page 19 VISCA Command List Part 1 Camera-Issued Messages Ack/Completion Message Command Function Command Packet Comments z0 4y FF Return when the command is accepted. ACK/Comletion (y: Socket No.) Messages z0 5y FF Return when the command has been Completion (y: Socket No.) executed.
  • Page 20 Returned when a command canot be z0 6y 41 FF executed due to current conditions.For Command Not Executable (y: Execution command Socket example, when commands controlling the No. Inquiry command: 0) focus manually are received during auto focus. Part 2 Camera Control Command Command Function Command Packet...
  • Page 21 Outdoor mode 8x 01 04 35 02 FF Outdoor mode OnePush mode 8x 01 04 35 03 FF One Push WB mode Manual 8x 01 04 35 05 FF Manual Control mode OnePush trigger 8x 01 04 10 05 FF One Push WB Trigger Reset 8x 01 04 03 00 FF...
  • Page 22 8x 01 04 3E 02 FF Exposure Compensation On/Off 8x 01 04 3E 03 FF Reset 8x 01 04 0E 00 FF CAM_ExpComp 8x 01 04 0E 02 FF Exposure Compensation Amount Setting Down 8x 01 04 0E 03 FF Direct 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp Position...
  • Page 23 mm: Register No. (=00-7F) CAM_RegisterValue 8x 01 04 24 mn 0p 0q FF pp: Register Value (=00-7F) p: Color Gain setting 0h (60%) to Eh CAM_ColorGain Diret 8x 01 04 49 00 00 00 0p FF (200%) SYS_Menu 8x 01 06 06 03 FF Turns off the menu screen 8x 01 06 01 VV WW 03 01 FF Down...
  • Page 24 Flip-HV 8x 01 04 A4 03 FF CAM_SettingSave Save 8x 01 04 A5 10 FF Save Current Setting CAM_Iridix Direct 8x 01 04 A7 00 00 0p 0q FF pq: Iridix Position High 8x 01 04 A9 00 FF High CAM_AWBSensitivit Normal 8x 01 04 A9 01 FF...
  • Page 25 y0 50 0A FF Shutter priority y0 50 0B FF Iris priority y0 50 0D FF Bright CAM_ShutterPosInq 8x 09 04 4A FF y0 50 00 00 0p 0q FF pq: Shutter Position CAM_IrisPosInq 8x 09 04 4B FF y0 50 00 00 0p 0q FF pq: Iris Position CAM_BrightPosInq 8x 09 04 4D FF...
  • Page 26 CAM_RegisterValueI mm: Register No. (00 to FF) pp: Register 8x 09 04 24 mm FF y0 50 0p 0p ff Value (00 to FF) p: Color Gain setting 0h (60%) to Eh CAM_ColorGainInq 8x 09 04 49 FF y0 50 00 00 00 0p FF (200%) CAM_IDInq 8x 09 04 22 FF...
  • Page 27 y0 50 01 FF C Type CAM_TypeInq 8x 09 00 03 FF y0 50 02 FF M Type y0 50 03 FF S Type Version dater: Big Version Numberss: CAM_DateInq 8x 09 00 04 FF y0 50 0r ss uu uu vv ww 0D FF Little Version Numberuuuu: Yearvv: Monthww: Day y0 50 00 FF...
  • Page 28 Command Command packed Inquiry Packet Comments uuuu: Zoom Position y0 50 0u 0u 0u 0u 00 00 0v 0v CAM_LensBlockInq 8x 09 7E 7E 00 FF vvvv: Focus Position 0v 0v 00 0w 00 FF w.bit0: Focus Mode 1: Auto 0: Manual pp: R_Gain qq: B_Gain r: WB Mode...
  • Page 29 Pelco-D Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 0xFF Address 0x00 0x08 Pan Speed Tilt Speed Down 0xFF Address 0x00 0x10 Pan Speed Tilt Speed Left 0xFF Address 0x00 0x04 Pan Speed Tilt Speed Right 0xFF Address 0x00 0x02...
  • Page 30 Pelco-P Protocol Command List Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 0xA0 Address 0x00 0x08 Pan Speed Tilt Speed 0xAF Down 0xA0 Address 0x00 0x10 Pan Speed Tilt Speed 0xAF Left 0xA0 Address 0x00 0x04 Pan Speed Tilt Speed 0xAF Right 0xA0...

  • Page 31: Menu Setting

    Menu Setting 1. MENU EXPOSURE Press [MENU] button to display the main menu on Mode Auto the normal screen, using arrow button to move the cursor ExpCompMode to the item to be set. Press the [HOME] button to enter the Backlight corresponding sub-menu.
  • Page 32 Bright: Intensity control, Optional items: 00~17. COLOR (Effective only in Bright mode) WB Mode Auto Anti-Flicker Flicker: Anti-flicker. Optional RG Tuning items: Off, 50Hz, 60Hz (Effective only in Auto, BG Tuning Bright mode) Saturation 100% Iris: Aperture value. Optional items: F1.8, F2.0,F2.4,F2.8,F3.4,F4.0,F4.8,F5.6,F6.8,F8.0,F9.6,F11.0, IR Filter Close（Effective only in Manual, AAE mode）...

  • Page 33: Noise Reduction

    AWB sens: The white balance sensitivity, Flip-V: Image Flip Vertical. Optional items: On,Off Optional items: Normal, High, Low. B&W-Mode: Image color. Optional items: On, Style: Optional items: Style1, Style2, Style3. Gamma: Optional items: Default,0.45,0.5,0.56, 0.63 4. IMAGE Move the cursor to the Image item in the main menu 5.
  • Page 34 main menu press [home] button, NOISE SETUP REDUCTION menu appears, as shown in the Language following figure. Protocol VISCA NOISE REDUCTION V_Address NR2D-Level 3 V_AddrFix NR3D-Level 3 Net Mode Serial D-HotPixel Baudrate 9600 Select Item Change Value [Menu] Back Select Item Language: menu language, Optional items: EN, Change Value Chinese...
  • Page 35 Baudrate: Serial port baud rate. Optional items: 2400, parameter restore default, Include IR Remote address and 4800, 9600 VISICA Address Save: Save Options. Optional items: Yes, No 8. RESTORE DEFAULT Move the cursor to the Restore Default item in the main menu and press [home] button, RESTORE DEFAULT menu appears, as shown in the following figure.

  • Page 36: Operating Environment

    Equipment Setup and internet connection 1. Operating Environment Operating System: Windows 2000/2003/XP/vista/7 Network Protocol: TCP/IP Client PC: P4/128MRAM/40GHD/ support scaled graphics card, support DirectX8.0 or more advanced version. 2. Equipment Installation 1) Connect internet camera to your internet or to your PC directly via internet cable. 2) Turn on DC12V power.
  • Page 37 Picture 1.2 Connect by router /interchanger IP camera visited/ controlled by LAN Setup IP address 1.1 Connect IP Camera to internet (or PC), then turn on the power on IP Camera, shown as above. IP address can be searched via update software(software upgrading tool,named upgrade_En.exe in small CD in package). shown as below: Run upgrade_En.exe (UPGRADE v1.8) by CD-Rom, click [Search].The software will show the current LAN camera's IP address, subnet mask number, network gateway number and camera MAC serial number etc, shown as below: If IPC IP address and PC IP address not in the same internet segment, upgrade_En.exe can modify IP address, subnet...
  • Page 38 Click “config” then go to below:...
  • Page 39 Enter new IP in "IP" bar, subnet mask in "Mask" bar, Gateway,First DNS, MAC address,and click “Set”. Shown as above.(For example: if your PC IP is 192.168.1.88, then camera IP must be 192.168.1.xx, the first, second, third number must keep the same) NOTE IP camera default IP address"192.168.100.88", user "admin", password "admin".
  • Page 40 2.2 Input login name and password, click "confirm", then pop up below window,language select button on the left bottom:...
  • Page 41 ！ NOTE If user first time use this camera by internet (only for new user), must install a player software (VLC). Please go to Then Install VLC (player software), http://4dx.pc6.com/xy/vlcplayer.zip,pop out the download window, click“Save”. After installation,login again,will show as above: IP Camera accessed/controlled by WAN (internet) 1.

  • Page 42: Vlc Stream Media Player Monitoring

    Dynamic DNS visit camera 1.1 Camera accessed by dynamic DNS Set domain name to camera, setup the parameter, then dynamic DNS can access camera. Access link：http://hostname :port number For example, setup host computer name: youdomain.f3322.org, camera port number: 554, Access link should be: http://youdomain.3322.org:554 ！...
  • Page 43 1.2 Input URL address: rtsp://ip: port number/1 (Main stream); rtsp://ip: port number/2(sub stream)(When RTSP port number default value is 554,then can be omitted as rtsp://ip/1 or rtsp://ip/2)

  • Page 44: Ip Camera Parameter Setup

    IP Camera parameter setup Homepage introduction 1.1 Menu All pages include 2 menu bars: Real time monitoring: displaying video image Parameter setup: with function buttons 1.2 Video viewing window Video viewing window must be same as video resolution, the bigger the resolution is, the bigger the playing area is. Double click viewing window, will show full-screen, double click again, will return to initialized size.
  • Page 45 1) PTZ direction control box: Up, down, left, right, home oblique button as above 2) Rate: Vertical speed can be chosen as 1 ~ 24, horizontal direction at the rate of 1 ~ 20. select corresponding speed and click direction button to realize PTZ speed up or speed down. 3) Zoom In/Zoom out: for zooming in or zooming out, Focus In/ Focus Out: Focusing on distant objects or Focusing on close objects.
  • Page 46 Media 1.1 Video Setup,please click "Video" Video format Support 50HZ(PAL)and 60HZ(NTSC),and Dial priority three formats. Video Coding Support baseline and mainprofile format Resolution...
  • Page 47 Main bit flow support 1920x1080,1280x720,minor bit flow support 640x360,320x180,the bigger resolution is, the clearer the image will be, more network bandwidth will be taken. Bit Rate User can assign bit flow/stream, normally speaking, the bigger bit flow is, the clearer the image will be. The bit allocation must combine with network bandwidth, when the network bandwidth is too narrow and the allocated bit flow is too big, will cause video signal flow not to be transmitted normally, the video effect will be worse.
  • Page 48 Brightness Image bright 0~100, slider control, on the right shows the corresponding numerical. Default 43. Saturation Saturation 0~100, slider control, on the right shows the corresponding numerical. Default 50. Contrast Contrast0~100, slider control, on the right shows the corresponding numerical. Default 57. Sharpness Sharpness0~100, slider control, on the right shows the corresponding numerical.
  • Page 49 Adjusted the wide-angle lens image distortion occurs, controllable range 0 ~ 100, right shows the corresponding numerical. Default 0. Flip & Mirror Tick Flip to realize image upside down, tick mirror to realize image around the mirror. Default not tick. Button Adjusting the parameters, press "apply"...
  • Page 50 Input VolL The volume of the left channel Input VolR The volume of the right channel Button Press "apply" button to save parameters, press "cancel" button to cancel parameter System Setting,please click “System” Work Mode Work Mode RTSP Reboot Click the "Reboot" button, system restart. User and password The user can modify the password (letters and Numbers only) Apply / Cancel...
  • Page 51 Lan Settings   Default the IP address is 192.168.100.88, The MAC address can be modified. Port Settings   IP address identifies the network device, the device can run multiple web applications, each network program using network port to transmit data, so data transmission to be carried out between the port and port. Port setting is to set up WEB SERVER program using which port to transmit.
  • Page 52 Network camera support RTSP protocol, use the VLC tools broadcast. TCP Port   Support TCP protocol, default port: 5678. Apply / Cancel   Modify network parameters then press "Apply" button to modify network parameters, press "Cancel" button to cancel network parameters. Device Information,please click “information”...

  • Page 53: Network Control

    Network Control 1. View from Web browser (better in IE) l To view from web browser, firstly need to check camera IP address. There are 2 methods to check: Method 1: press * and # and 4 on remote controller one by one, the camera IP address will be shown on screen.
  • Page 54 Method 2: Open “upgrade_En.exe”, change IP and click “Set”...
  • Page 55 Once IP changed, need to restart the camera. 2 methods to restart as below: Method 1: Turn off and turn on manually to restart camera Method 2: On web page, find “System” and click “Apply” (when under remote controlling environment, better use this method)
  • Page 56 PTZ ON IP NETWORK This model currently supports various PTZ control methods, including RS232, RS485, IR remote control, HTTP CGI, and TCP protocol. The following is the detailed description about HTTP CGI and TCP Protocol control methods. 1. TCP Protocol Method V51N implements TCP server inside, there is a port configurated by Web for receiving the connection from TCP client,the TCP port number is 5678.
  • Page 57 DownRight 81 01 06 01 VV WW 02 02 FF Stop 81 01 06 01 VV WW 03 03 FF Home 81 01 06 04 FF Reset 81 01 04 3F 00 PP FF osition Number(==0x00-0x59, Preset position 81 01 04 3F 01 PP FF 0x64-0xFE) Recall 81 01 04 3F 02 PP FF...
  • Page 58 http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&[action]&[position number] More descriptions: [Camera IP]: This camera IP address; [action] including: posset, poscall; [position number]: 0-89,100-254. USB Control Connect USB cable from camera to computer (must with USB3.0 port) Install the software in the small CD in the package (amcap.exe) ,and click to open.

  • Page 59: Camera

    Maintenance and Troubleshooting Camera Maintains l If camera will not be used for a long time, please turn off the power switch, disconnect AC power cord of AC adaptor to the outlet. l Use soft cloth or tissue to clean the camera cover. l...

  • Page 60: Copyright Notice

    3. Check IR address of the Remote Commander is set correctly. l Serial communication cannot control the camera 1. Check the camera working mode. 2. Check control cable is connected correctly. Copyright Notice All contents of this manual, whose copyright belongs to our Company. Cannot be cloned, copied or translated without the permission of the company.

Table of Contents