Bios Security Features; Exit - SOYO SY-KT880 DRAGON 2 User Manual

BIOS Setup Utility

3-7 BIOS SECURITY FEATURES

If you highlight this item and press Enter, a dialog box appears that you can
enter a Supervisor password. You can enter no more than six letters or
numbers. Press Enter after you have typed in the password. There will be the
second dialog box asking you to retype the password for confirmation. Press
Enter after you have retyped it correctly. Then, the password is required for
the access to the Setup Utility or for it at start-up, depending on the setting of
the Password Check item in Advanced Setup.
CMOS Setup Utility – Copyright (C) 1985-2002, American Megatrends, Inc.
Security Settings
Supervisor Password
User Password
Change Supervisor Password [Press Enter]
Change User Password
Clear User Password
Boot Sector Virus Protection [Disabled]
:Move Enter:Select +/-/:Value
F7:Previous Values

3-8 EXIT

Highlight this item and press Enter to save the changes that you have made
in the Setup Utility configuration and exit the program. When the Save and
Exit dialog box appears, press Y to save and exit, or press N to exit without
saving.
BIOS Security Features
: Not Installed
: Not Installed
[Press Enter]
[Press Enter]
F8:Fail-Safe Defaults
77
SY-KT880 DRAGON 2
Install or Change the
password.
F10:Save ESC:Exit F1:General Help
F9: Optimized Defaults
Item Help