Apm Configuration - SOYO SY-KT880 DRAGON 2 User Manual

BIOS Setup Utility

APM Configuration

Setting
Power Enabled
Management/
Disabled
APM
On/Off
Power Button
Mode
Standby
Suspend
Restore on Power Off
AC/Power
Loss
Power On
Last State
Standby Time Disabled
Out
1 Min, 2 Min,
4 Min, 8 Min,
10 Min, 20 Min
30 Min, 40 Min
50 Min, 60 Min
Suspend Time Disabled
Out
1 Min, 2 Min,
4 Min, 8 Min,
10 Min, 20 Min
30 Min, 40 Min
50 Min, 60 Min
Description
Use this item to enable or
disable a power management
scheme. If you enable power
management, you can use the
items below to set the power
management operation.
Setting power button mode.
The system will remain off
when power comes back after a
power failure.
The system will switch on when
power comes back after a power
failure.
The system will return to the
state it was in before the power
failure when power returns. (i.e:
If the system was on, it will
switch on again, if it was off, it
will remain off)
Lets you define the standby
time out times.
Lets you define the suspend
time out times.
65
SY-KT880 DRAGON 2
Note
Default
Default
Default
Default
Default