Check if the power cable is damaged, attened, cut or otherwise degraded.
➢
Completely remove any dust or foreign material from the housing, wiring and
connection parts.
➢
When connecting wires, make sure to connect them using the relevant connectors
and check that they are completely connected.
➢
Make sure to discharge the PBA power and capacitor terminals before starting the
service.
➢
When replacing the heater, make sure to fasten the holder heater after ensuring
that it is inserted into the bracket-heater.
➢
Check for any water leakage.
➢
Do not allow consumers to repair or service any part of the dishwasher
themselves.
➢
If it seems that grounding is needed due to water or moisture, make sure to run
grounding wires.
(Check the grounding of the power outlet, and additionally ground it to a metallic
water pipe.)
➢
[Running a grounding wire]
2 _ Safety Instructions
While Servicing
After Servicing