Table of Contents
Advertisement
PC Setup Software
Setup software for a Windows compatible PC computer is supplied with the console. The software has integrated Help. Refer to the integrated
Help for detailed instruction on use of the software.
The PC is connected to the console through an RS232 serial connection. Computers without RS232 connections built-in may use an external
USB to RS232 device.
Position Setup Page
The Position Setup page is displayed below. The software will display 14 fader channels.
This page selects for each fader channel:
(1) Source input
(2) Fader trim calibration
(3) Source logic
(4) Misc setup
(5) Off-line mix
(6) Reset Timer
NOTE: this software may be updated from time to time due to new features. Refer to the integrated Help supplied with your console for a current
description of this software.
[mic, analog line, digital, remote],
[channel gain],
[pulsed or sustained],
[specific to the type of source input selected],
[bus assignment],
[auto reset timer to 0 when channel on]
1 5
T H E
X - M I X E R
D I G I T A L
C O N S O L E
Advertisement
Table of Contents
