Advertisement
NOTICE
The stand mixer has a polarized plug
(one blade is wider than the other).
To reduce the risk of electric shock,
this plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician.
Do not modify the plug in any way.
UNPACKING
INSTRUCTIONS
. Place the gift box containing your
Cuisinart
Food Processor Stand
™
Mixer Attachment on a flat sturdy
surface before unpacking.
. Remove the instruction booklet
and other printed materials.
. Remove the top corrugated
insert. Carefully lift out the box
with the reversible slicing/shred-
ding disc.
4. The bowl contains the chopping
blade. Remove the lid, then
carefully remove the chopping
blade as it is very sharp.
5. Carefully lift the Cuisinart
™
Food
Processor Stand Mixer
Attachment from the box.
To assemble the food processor
attachment, follow the Assembly
Instructions on page 5. Replace all
corrugated inserts in the box and
save the box for repackaging.
Before using for the first time: Wash
all parts according to the Cleaning
and Maintenance section on page 7
of this booklet to remove any dust or
residue.
4
PARTS AND DIAGRAMS
1
1. Food pusher with oil dispenser
2. Stainless steel reversible slicing/
shredding disc
3. Work bowl cover with
feed tube
4. Clear work bowl
5. Stainless steel chopping blade
6. Adapter stem (not shown)
7. Gear collar
ASSEMBLY
INSTRUCTIONS
. Hold the gear collar in one hand
and work bowl handle in the
2
other. Twist work bowl clockwise
onto collar.
. Place the adapter stem into the
work bowl.
. Place the chopping blade or the
slicing/shredding disc onto the
adapter stem in the work bowl.
Be sure to handle the blade
and disc with care as they are
3
razor sharp!
4. Put cover on work bowl by turn-
ing it clockwise until it fits into
4
position.
5. The food pusher fits in feed tube
5
with the more rounded side
towards the outside of the bowl.
6. Open the top cover on your
stand mixer and screw the gear
collar of your food processor
7
attachment onto the outlet.
USING THE FOOD
PROCESSOR TO SLICE
AND SHRED
The slicing/shredding disc can
slice and shred a variety of fruits,
vegetables and cheeses.
. Begin with the work bowl
attached to the high speed
power outlet, and the slicing/
shredding disc on the adapter
stem with the desired cutting
blade facing up.
. To slice: Attach disc to stem with
the raised edge of slicer on top.
To shred: Attach disc to stem
with the raised shredding slots on
top. Be sure to handle the metal
blade with care, as it is razor
sharp.
. Place cover on work bowl, with
feed tube at about o'clock.
Turn cover clockwise until it fits
into position.
4. Hold pusher with more rounded
side toward the outside of the
bowl and insert it in feed tube
over food.
Fruits and vegetables: Put food
in feed tube, press ON button
and push food through.
Medium-hard cheeses (like
Cheddar and Swiss): Use only
well-chilled cheeses. Put food in
feed tube, press the ON button,
wait 5 seconds and push food
through. Do not use the slicing/
shredding disc to process hard
aged cheeses such as Parmesan.
ALWAYS USE PUSHER TO
GUIDE FOOD THROUGH FEED
TUBE. NEVER USE YOUR
FINGERS OR SPATULA.
5. Turn your stand mixer to speed .
6. Unlock cover by turning it
counter-clockwise, then lifting
it straight up and off.
USING THE FOOD
PROCESSOR TO CHOP
AND PURÉE
. Place the chopping blade over
the shaft in the work bowl. The
blade should slide easily to the
bottom of the bowl. The lower
blade will almost touch bottom
of bowl.
5
Advertisement
