Specifications; Optional Accessories; Standard Accessories; Battery Removal/Installation - Hitachi WH 14DSAL Handling Instructions Manual

English
11. If there is battery leakage, foul odor, heat
generated, discolored or deformed, or in any way
appears abnormal during use, recharging or
storage, immediately remove it from the
equipment or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and
contact a doctor immediately.
If left untreated, the liquid may cause eye-
problems.
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin
irritation.

SPECIFICATIONS

POWER TOOL
Model
No-load speed
Capacity (Ordinary bolt)
Tightening torque (Maximum)
Rechargeable battery
Weight
CHARGER
Model
Charging voltage
Weight

STANDARD ACCESSORIES

In addition to the main unit (1), the package contains the
accessories listed in the table below.
1 Charger (UC18YRSL or UC18YGSL) ... 1
2 Battery (BSL1830 or BSL1815X) .... 2
WH18DSAL
3 Plastic case ....................................... 1
4 Battery cover .................................... 1
1 Charger (UC18YRSL or UC18YGSL) ... 1
2 Battery (BSL1430 or BSL1415X) .... 2
WH14DSAL
3 Plastic case ....................................... 1
4 Battery cover .................................... 1
Standard accessories are subject to change without
notice.
37
WH14DSAL
BSL1430: Li-ion
14.4 V (3.0 Ah 8 cells) 14.4 V (1.5 Ah 4 cells) 18 V (3.0 Ah 10 cells) 18 V (1.5 Ah 5 cells)
1.6 kg
UC18YRSL UC18YGSL
14.4 V – 18 V 14.4 V – 18 V
0.6 kg 0.4 kg
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return
it to your supplier or vendor.
WARNING
If an electrically conductive foreign object enters the
terminals of the lithium ion battery, a short-circuit may
occur resulting in the risk of fire. Please observe the
following matters when storing the battery.
Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
Either install the battery in the power tool or
store by securely pressing into the battery cover
until the ventilation holes are concealed to prevent
short-circuits (See Fig. 1).
0 – 2600 min
M6 – M14
140 N·m
BSL1415X: Li-ion
1.4 kg

OPTIONAL ACCESSORIES

(Sold separately)
1. Battery
(BSL1430) (BSL1415X)
Optional accessories are subject to change without notice.
APPLICATION
Driving and removing of machine screws, wood
screws, tapping screws, etc.

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Fig. 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
WH18DSAL
–1
145 N·m
BSL1830: Li-ion BSL1815X: Li-ion
1.7 kg
(BSL1830) (BSL1815X)
1.5 kg