Wolf Outdoor Gas Grills - Wolf OG30 Installation Manual

Wolf Outdoor Gas Grills

Outdoor Grill Installation
Read this entire installation guide prior to installation and
save for the local inspector's reference. The homeowner
should keep this installation guide for future reference.
The installation of this appliance must conform with local
codes or, in the absence of local codes, either the National
Fuel Gas Code, ANZI Z223.1/NFPA 54, or CAN/CGA-
B149.1, Natural Gas Installation Code or CAN/CGA-
B149.2, Propane Installation Code.
The utilization of an external electrical source requires that
when installed, this outdoor cooking gas appliance must
be electrically grounded in accordance with the local
codes or, in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1. Keep any electrical supply cord, or the
rotisserie motor cord and the gas supply hose away from
any heated surfaces.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency, and amperage ratings are listed on
the product rating plate.
Record the model and serial numbers before installing the
outdoor grill. Both numbers are listed on the product
rating plate, located behind the drip tray, below the logo.
The drip tray must be removed to view the rating plate.
Refer to the illustration below.
Wolf Outdoor Gas Grill
Model Number
Serial Number
RATING PLATE
Location of rating plate.
3
wolfappliance.com