ZyXEL Communications ZyWall 10 User Manual page 38

ZyWALL 10~100 Series Internet Security Gateway
FIELD
Press [SPACE BAR] to select Yes and then press [ENTER] to
have the DDNS server automatically update the IP address of
the host name(s) with the public IP address that the ZyWALL
Use Server
uses or is behind.
Detected IP
You can set this field to Yes whether the IP address is public or
private, static or dynamic.
Press [SPACE BAR] to select Yes and then press [ENTER] to
update the IP address of the host name(s) to the IP address
User Specified IP
specified below.
Addr
Only select Yes if the ZyWALL uses or is behind a static public
IP address.
Enter the static public IP address if you select Yes in the User
IP Address
Specified IP Addr field.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
The IP address updates when you reconfigure menu 1 or perform DHCP client renewal.
2-4
Table 2-2 Configure Dynamic DNS Menu Fields
DESCRIPTION EXAMPLE
Yes
No
N/A
SMT Menu 1 – General Setup