Table of Contents
Advertisement
Listening to playback sounds of Game, VCR,
mercially
H
DVD, etc.
1.
Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) sockets.
2.
Connect a TV to the rear VIDEO OUT socket.
Switch the TV input to auxiliary.
3.
Press the ON/STAND-BY button to turn the power on.
4.
Press the GAME/VIDEO button.
5.
Play the connected equipment.
You can enjoy sounds from the supplied speakers and images
on the TV.
Note:
To prevent noise interference, place the unit away from the television.
Auto power on function:
Red
When you press any of the following buttons, the unit turns on.
I GAME/VIDEO button (main unit and remote control): The unit turns
on and "GAME" function is activated.
I 0 button (main unit and remote control): The unit turns on and
playback of the last function starts (DVD/CD/TAPE/TUNER/GAME).
To record on a tape from Game, VCR etc.
H
1.
Insert a cassette in the TAPE 2 cassette compartment.
2.
Press the GAME/VIDEO button.
3.
Press the I6 button.
4.
Press the 0 button.
5.
Play the game system, VCR, etc.
Headphones
H
I Do not turn the volume on to full at switch on and listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
I Before plugging in or unplugging the headphones, reduce the volume.
I Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The
recommended impedance is 32 ohms.
I Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
Downloaded From Disc-Player.com Sharp Manuals
3/21/07, 3:12 PM
CD-DV650W
CD-DV850W
ENGLISH
E-66
Advertisement
Table of Contents
