Connecting Gs-Rams To The Ramkeeper's Front - Applied Engineering EY5QGRAMKEEPER User Manual

*
Connecting GS-RAM Cards to the RamKeeper's Front
*
To connect directly to the front of the RamKeeper, all GS-
RAM cards (except the GS-RAM REV A and the CS-RAM-
Plus REV A) require the male to male connector. (If
you're using a GS-RAM REV A or a GS-RAM Plus REV A,
skip to step "C".)
A) First, notice the white pegs in two holes of the
8 RamKeeper
Note: If you're connecting only one card and it
will work in the back pocket, you should install it
there as this is the easiest connection to make.
(Skip to step 10.)
Note: If you have a SlotMover, skip to the next
section.
RamKeeper.
Note pegs in front connector