Mounting The Camera - DRIFT HD Ghost Quick Manual

using the two-way remote
POWER ON AND OFF
1. Hold the
button to power on
a
2. The colour of the remote
control's LED indicator
will show the current
camera mode
B 3. The remote will
automatically power
off if it does not find a
camera after 15s
4. To charge, connect the
remote control via the
mini USB cable provided
The Remote is NOT waterproof.
to a powered USB port
ACTION button
USING THE REMOTE
STOP button While the camera and remote
are on and paired, pressing
11
ACTION will begin recording
video, capture a photo, start
ACTION
timelapse or photoburst,
depending on the camera
mode. Pressing STOP will end
video or timelapse recording.
Pressing ACTION while
recording video will capture a
photo, or start Video Tagging
(if activated, see p10). Pressing
STOP will end recording.
The LED will blink blue to
confirm a signal between
camera and remote.
Pressing STOP while the
camera is in Live Preview
will toggle between camera
modes, indicated by LED
colour (see p 7-8).

mounting the camera

1. Attach the Universal Clip 2. Slide the Universal Clip
to the camera in any 360° into your chosen mount,
orientation as needed— ensuring that it 'clicks'
first position the clip in into place
the desired orientation,
then secure by rotating
the screw base by hand
3. Check screen alignment,
rotating the lens by hand
as necessary to realign
your shot, using the
lens marker as an 'up'
reference
12