Connect To The Internet With Bt Access Manager - BT E180 Quick Start Manual

Connect to the Internet with BT Access Manager

Turn your laptop on and insert the E180. If you left it inserted, remove and replace
the E180 after powering up, to make sure your laptop detects the device.
users: double-click the shortcut icon on the desktop to open the
1 Windows
®
BT Access Manager software.
users: inserting or re-inserting the E180 will display a BT Access Manager
Mac
®
CD icon. Launch BT Access Manager by double-clicking the BT Access Manager
icon in the new window that will appear.
BT Access Manager will open up – click on the central icon to connect.
2
It may take a few seconds for all available networks to be identified.*
If 3G/HSPA is the only available network, the central icon will look like this
Connection available. Once successfully connected, the status will
change to Connected.
If more than one network is available then BT Access Manager will select the
highest priority network and its icon will appear at the centre (for example Wi-Fi
will appear as
Further information and help including a full BT Access Manager user guide,
are available from www.bt.com/accessmanager.
* Mac user experience will be different. You will only be able to connect to the BT Mobile network using your
®
E180 USB Stick and BT Access Manager software.
).*
11