Vantech VP-454CVI User Manual page 22

(1) PTZ Setup
【Channel】Choose regional channels, Settings "whole" says setting all channels
【PTZ Protocol】PTZ equipment communication protocol
It contains these options: Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control、
RM110、SAMSUNG，the default option is Pelco_D.
★Note:
PTZ parameter Settings every channel need after completion in Settings of gc1318 alone.
【PTZ Address】PTZ equipment address, digital range 0 to 255.
★Note:
here with the address must be consistent ball machine address, we can't control the ball machine.
【Bit-rate】PTZ equipment baud rate.
(2)Video Setup