Table of Contents
Advertisement
position. Click【clear】button, this preset points will be cleared
【Setup】Click 【Pattern Start】 the trajectory of said no corresponding, click the 【 Add Preset 】 and 【 Delete
Preset】, 【Clear Tour】 the cruise lines.
【Pattern Start】 begin to track record, was registered date 【Pattern Stop】 ， thus set up from the corresponding track
circuit.
【Left Limit】Began to limit scanning Settings, was registered date 【 right Limit 】, thus set up corresponding limit
scanning.
【Add Preset】Add preset points to the cruise lines.
【Delete Preset】Cruise lines from deleting preset points.
【Clear Tour】Remove the cruise line designated.
Note
: some equipment doesn't fully support all function, depending on the specific PTZ equipment
【Control】PTZ Control
【Tour Scan】Point between cruise control.
【Pattern Scan】Track patrol control.
【PTZ Reset】Remove all Settings, original reset to the original state.
【Limit Scan】PTZ boundary scan control.
【Auto Pan】Remove the cruise line designated
Note
: some equipment doesn't fully support all function, depending on the specific PTZ equipment.
Hide quick links:
Advertisement
Table of Contents
