Table of Contents
Advertisement
∫ Still Mode
Select the type of picture shown when you pause
playback.
Automatically selects the type
Automatic
of picture shown.
Select if jittering occurs when
Field
"Automatic" is selected.
Select if small text or fine
patterns cannot be seen
Frame
clearly when "Automatic" is
selected.
∫ Seamless Play
The chapter segments in playlists are played
seamlessly.
≥ Select "On" when the picture freezes for a
moment at the chapters segment in playlists.
A high resolution image/display technology of
*1
approximately 4000 (width) k 2000 (height) pixels.
A progressive image recorded at a rate of 24 frames per
*2
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
Sound
∫ Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ "Automatic" is effective only when playing Dolby
TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
MPEG Audio
Select the audio signal to output.
≥ Select "PCM", when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If "Off" is selected, the unit outputs the primary
audio only.
HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Select "Off" when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an DIGITAL AUDIO
OUT terminal.
∫ OPTICAL / COAXIAL Down Sampling
Select whether or not to convert the sampling
frequency of the audio to be output from the
OPTICAL/COAXIAL terminal.
If you choose to convert the sampling frequency,
you can limit the maximum output to 48 kHz or
96 kHz.
≥ Set a frequency supported by the connected
device.
≥ When playing back BD-Video, signals are
converted to 48 kHz despite the settings in the
following cases:
– when the signals have a sampling frequency
of 192 kHz
– when the disc has copy protection
– when "BD-Video Secondary Audio" is set to
"On"
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select "Surround encoded", when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
"Digital Audio Output" is set to "Bitstream".
≥ The audio will be output in "Stereo" in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
∫ HDMI Output Settings of Music Playback
Minimise the audio noise during music playback
by automatically switching the video output to
1080i.
29
SQT0280
Hide quick links:
Advertisement
Table of Contents
