Sound Settings - Panasonic DMP-BDT700 Operating Instructions Manual

Sound Effect Settings
∫ Sound Effects
*1, *2
Select the sound effect.
This setting is also able to switch by pressing
[SOUND EFFECT].
≥ Night Surround :
Enjoy a movie with powerful sound even when
the volume is kept low at night. The audio is set
in such a way that it can be heard easily.
≥ Re-master :
This feature gives you brighter sound by
increasing the high frequency portion of the
audio.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
Re-master 1 Pop and rock
Re-master 2 Jazz
Re-master 3 Classical
≥ Digital Tube Sound :
This feature gives you a warm sound, like that
produced by a vacuum tube amplifier.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
Digital Tube
A crisp, delicate sound
Sound 1
Digital Tube
A tight, hi-fi sound
Sound 2
Digital Tube
A soft, rich sound
Sound 3
Digital Tube
A clear, powerful sound
Sound 4
Digital Tube A distinctive mid-range
Sound 5 sound
Digital Tube
A soft, enveloping sound
Sound 6
∫ Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in "Sound Effects".
≥ Even when "96/88.2kHz" is selected, an audio
source with a sampling frequency of 96 kHz or
higher will be output with the original sampling
frequency.
≥ When "Sound Effects" is set to "Off", this setting
is disabled.
26
SQT0280
Not every function can be set individually.
*1
This function is effective for audio from HDMI AV OUT or
*2
DIGITAL AUDIO OUT only when "Digital Audio Output" is
set to "PCM" ( 29).

Sound Settings

∫ Dialogue Enhancer*
The volume of the centre channel is raised to
make dialog easier to hear.
∫ High Clarity Sound
Stop processing signals that affect the audio
quality or turn off the unit's display to make the
audio quality clearer. (
Select whether or not to output images.
This setting is able to switch by pressing [HIGH
CLARITY].
≥ If "On (Video Off)" is selected, the setting will be
cancelled after you play back a video.
* This function is effective for audio from HDMI AV OUT or
DIGITAL AUDIO OUT only when "Digital Audio Output" is
set to "PCM" ( 29).
3D Settings
These settings are also displayed by pressing [3D
SETTING].
∫ Signal Format
Original Keep original picture format.
3D picture format comprising
Side by side
of left and right screens.
Converts 2D pictures to 3D
2D to 3D
effect.
∫ 3D Picture Mode
Play back pictures with normal
Normal
3D effects.
You can enjoy 3D pictures with
Soft a feeling of broadness, holding
back the depth perception.
Play back 3D pictures with
Manual
settings of "Manual Settings".
30)