Connecting The Antenna Or The Cable; Plugging In The Ac Power Cord - Philips 39PFL1707 User Manual

Connecting the antenna or the cable

Be sure your antenna or other device is connected properly before

plugging in the AC power cord.

If you connect to an antenna through RF cable
Any ATV programs that are broadcasted in your area can be received
for free through an antenna connection.
antenna antenna
IN IN
RF cable RF cable
If you connect a set-top box through RF cable
If the TV is connected to a cable box or satellite set-top box via a
coaxial connection, set the TV to channel 3, 4 or the channel specifi ed
by the service provider.
antenna antenna
IN IN
RF cable RF cable
If you connect a set-top box through HDMI
If the TV is connected to a cable box or satellite set-top box via HDMI,
make sure you select the correct Source by using
IN IN
HDMI cable HDMI cable
If you connect a set-top box through Component Video Input
If the TV is connected to a cable box or satellite set-top box via
Component Video Input, make sure you select the correct Component
Video Source by using SOURCE.
IN IN
Audio (L/R) cables Audio (L/R) cables
IN IN
Component (Y/Pb/Pr) video cables Component (Y/Pb/Pr) video cables
cable cable
OUT
RF cable RF cable
IN
OUT
set-top box set-top box
SOURCE.
RF cable RF cable
IN
OUT OUT
set-top box set-top box
RF cable RF cable
OUT OUT
IN
set-top box set-top box
OUT OUT
Connecting a set-top box, Blu-ray disc / DVD recorder
via composite connectors and Analog Audio
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
RF cable RF cable
IN IN
Audio (L/R) + Video cables Audio (L/R) + Video cables
IN IN
Note
•
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable
from the antenna Input jack before moving the unit.
•
To Turn On your reception source easily between antenna and cable, install an antenna
selector.
•
If you are not receiving a signal from your cable service, contact the Cable provider.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet
after all the necessary connections are made.
Note
•
Each time you plug in the AC power cord, no operations will be performed for a few
seconds. This is not a malfunction.
cable cable
OUT OUT
RF cable RF cable
IN IN
set-top box set-top box
OUT OUT
OUT
Audio (L/R) + Audio (L/R) +
Video cables Video cables
OUT OUT
IN
Blu-ray disc/DVD recorder Blu-ray disc/DVD recorder
11
English