Charging - Samsung SR8850 User Manual

Operating the cleaner
INSTALLING THE ROBOTIC VACUUM CLEANER

CHARGING

When the product is initially purchased, the battery
is fully discharged, and you must charge the robotic
vacuum cleaner manually.
1. After aligning the charge pins of the main unit with
the charge pin of the charger station, press the main
unit until you hear a "Recharging power" sound from
the charger.
2. Check the charge status of the robotic vacuum
cleaner.
When charging is complete, the battery level indicator and
! When the product is initially purchased, it will take about 120 minutes to fully charge the battery
and will run for about 90 minutes.
NOTE
!
! Measures to take when charging is not smooth.
When the robotic vacuum cleaner cannot be automatically charged, check the following:
charge connector on the main unit and the charger with a dry cloth.
! When separating the robotic vacuum cleaner from the charger, it will discharge naturally.
unattended for a long period of time due to a business trip, travelling etc., turn off the Power
22_ Operating the cleaner
!"#$%&&'($)*+,-.!!!//
Turn on the Power Switch at the bottom of the product.
When the battery level display flashes
Flash
while cleaning, the robotic vacuum
cleaner stops vacuuming and
automatically charges itself at the charger.
robotic vacuum cleaner cannot be operated by the remote controller
Flash
or the buttons on the main unit. In this case, directly carry the robotic
Charging Fully charged
<Charge display>
Charge Charging
complete charging
/&(&*/*/0!!!(1//1'!34