Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Weldex WDB-5655VDN
Summary of Contents for Weldex WDB-5655VDN
- Page 1 Digital Day & Night IR Color Camera 설명서용 서 MANUAL IR LED type Without IR LED type...
- Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un insulated Dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the...
- Page 3 ■ Warning The camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be caused. Do not install the camera on a surface that can not support it.
-
Page 4: Names And Functions Of Parts
■ Precautions Only use the camera under conditions It can cause the image quality to be poor. where temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures. Severe lighting change or flicker can It is one of the most important parts of cause the camera to work improperly. -
Page 5: Additional Functions
1. Features ☺Horizontal Resolution 600 TV Lines Clear image quality has been achieved by employing a SONY CCD with 410,000 (Effective) pixels, which provides a horizontal resolution of 600 TV lines. ☺DAY & NIGHT This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions. - Page 6 2. Cable Connection & OSD Control 1) Cable Connection LEFT RIGHT DOWN 2) OSD Control ① 3AXIS BRACKET - Please loosen screws and fix tilted and panned position. ③ LENS : Vari-Focal Auto Iris Lens ( 6.0mm ~ 50mm ) ③...
-
Page 7: Osd Menu Structure
3. Setup Menu Operation □ USING ICONS IN THE MENU (EXIT) Exits the menu setting. Before you exits the menu setting, select ◆ SAVE to save your settings, or select QUIT to cancel. (RET) Returns to the previous menu ◆ (HOME) Returns to the main menu. - Page 8 □ MAIN MENU ◆ CAMERA SET Configure Camera related functions and data. ◆ INTELLIGENCE You can configure the settings of motion detection and more. ◆ PRIVACY ZONE You can configure the privacy related settings. ◆ OTHER SET You can configure for Factory Defaults, and more. ◆...
- Page 9 ● IRIS [ALC, ELC] The IRIS menu is used if you want to adjust the intensity of radiation incoming to the camera. ● ALC (Automatic Light Control) ①If you press the SET switch with an ALC based sub menu selected, you will see the appropriate screen.
- Page 10 ●AGC[OFF, VERYLOW, LOW, MID, HIGH, VERYHIGH, USER, FIX] The AGC (Auto Gain Control) menu is used to set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value.
- Page 11 ●SHUTTER [OFF, AUTO1/100(PAL:1/120), AUTO1/250, AUTO1/500, AUTO1/1000, AUTO1/2000, AUTO1/4000, AUTO1/10K, 1/100(PAL:1/120), 1/250,1/500, 1/1000, 1/2000, 1/4000, 1/10K, EXT] The SHUTTER menu is used to set the fixed high-speed electronic shutter, auto high speed electronic shutter and external high speed electronic shutter (EXT). You can select one of 7 options from 1/100(PAL:1/120) to 1/10K for the fixed high speed electronic shutter, which is mostly used for imaging a fast moving object.
- Page 12 Note : ※ -If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor. -If you set the digital zoom factor to greater than the enlarged zoom factor for the compensation, the DIS function will be deactivated. ●...
- Page 13 You can specify Mask 1 and 2 simultaneously. The mask is used only for determining the filter switch and any excessive bright area at night will be masked. ※Note: -If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated. ◇...
- Page 14 ◇ AWC (Auto White Balance Control):If you press the SET switch in the appropriate item position, Auto White Balance will perform once. ◇ 3200K : Set color temperature to 3200K ◇ 5600K : Set color temperature to 5600K RED : Adjusts the strength of the red color. BLUE : Adjusts the strength of the blue color.
- Page 15 ● PIP [OFF, ON] Displays a sub image together with the main image on the same screen using the Picture in Picture function. ※Note: -If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP function will be deactivated.
- Page 16 3) PRIVACY ZONE SETUP The PRIVACY function will protect your privacy by screening the privacy area that you have specified during monitoring. You can specify up to 12 privacy zones. If you set the PRIVACY SET to ON, your PRIVACY ZONE settings will be applied.
- Page 17 4) OTHER SET ● FACTORY DEFAULTS All the settings will be restored to the factory default. However, the settings of PROTOCOL, BAUDRATE, ADDRESS and LANGUAGE will not be restored to the default. ● OSD COLOR [BW, R/G/B] You can set the OSD (On-screen Display) color to COLOR or B/W.
- Page 18 5. Troubleshooting If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Troubleshooting Nothing appears • Please check the power connection. on the screen. •...
- Page 19 6. Protocol Setting Manual How to set the protocol 1. Turn off the power 2. Set the Rotary Hexa Switch (0~F) to ‘0’. The Rotary Hexa Switch is located in bottom side of the below picture. 3. Supply the power and then wait for around 3 sec -> It will be entered to Protocol setting mode.
- Page 20 How to set the Camera ID 1. Turn off the power of Camera. 2. Select one value among 1~E for the Rotary Hexa switch in bottom side of the picture. ☞ Caution ☜ 0: not allowed to be set - It is using for protocol setting ID. Not allowed to be set for Camera ID F : Not allowed to be set –...
- Page 21 How to operate the Camera by Networking 1. Control the camera by the connected Keyboard after setting of Baudrate and Protocol ID. In case using PELCO-D protocol, the calling key is Preset 30. Use Preset key as menu key because there is no menu key in PELCO-D. But D-MAX supplies a menu key.
- Page 22 7. Specifications Sub-items NTSC CCD Device SONY 1/3" CCD SONY 1/3" CCD Total Pixel 811 x 508 795 x 596 Effective Pixel 768 x 494 752 x 582 Inter. H/V Sync 15,734/59.94Hz 15,625/50Hz LL H/V Sync 15,750/60Hz 15,625/50Hz Horizontal Resolution More than 560(Color) / 600(BW)TV Lines Color mode 50 IRE...
Need help?
Do you have a question about the WDB-5655VDN and is the answer not in the manual?
Questions and answers