WARNINGS and CAUTIONS WARNINGS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY MEALMETALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHERS OPENINGS ON THE EQUIPMENT. CAUTIONS CAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,...
COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFEGUARDS Please install the product on a completely flat floor. Always check the strength and stability of the insta llation location. Do not drop the appliance on the floor. This may result in damage or injury. Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers.
Page 5
TABLE of CONTENTS -WARNINGS AND CAUTIONS -COMPLIANCE STATEMENT -CE COMPLIANCE STATEMENT -IMPORTANT SAFEGUARDS -TABLE of CONTENTS -INTRODUCTION INDOOR -PACKAGE CONTENTS -INSTALLATION & CONFIGURATION --Basic configuration of Dome --Rear View --Swith Settings --Before Installation --Surface Mount Installation --Inceiling Installation -DIMENSION -SPECIFICATION -INTRODUCTION OUTDOOR -PACKAGE CONTENTS...
Page 6
TABLE of CONTENTS --Display : OSD Setup Area Title Privacy Zone Image Setup --Dome : General Motion Home Preset Tour Pattem Scan --Camera : Focus/Zoom Shite Balance Exposure Advanced Setup --Alarm...
INTRODUCTION The Controller and Mini Speed dome make up the building blocks for any surveillance / security system. Using a multiple Controller and multiple dome cameras, no place is too large for monitoring and recording. Extendable and flexible architecture facilitates remote control functions for a variety of external switching devices such as DVR, Matrix switcher and Dome Camera FEATURES MINI SPEED DOME MINI SPEED DOME...
Page 9
CAM : 001 BAND CAM : 001 BAND INPUT ? : INPUT ? :...
Page 11
Before installation, please s If you are going to use pelco-D, pelco-P or standard protocols to communicate with the dome system, you do not have to set any switches. The unit automatically detects these protocols. See Table A for details.
Page 23
CAM : 001 BAND CAM : 001 BAND INPUT ? : INPUT ? :...
Need help?
Do you have a question about the WDS-1010P and is the answer not in the manual?
Questions and answers