Game Box Replacement - JVL Echo Technical Support Manual

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Game box replacement

3.
Game box replacemenT
1. Turn off the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Unscrew 4 Machine Screws:
(Two- #8-32 x 1-1/4" and two #8-32 x 3/8") and open the monitor to gain access to all electronic
components (see Fig. 3 on page 28 and Fig. 4 on page 29 for details).
5. Press on the snaps of the Inner Cover to unlock them. Tilt the cover towards you, and then slide
the Inner Cover upwards. Move it along the Monitor Stopper Cable and set it aside (see Fig. 5 on
page 30 for details).
6. Unplug all connectors from the CPU Box. These connectors are:
• USB upgrade cable
• Power Pad cable
• Touch screen cable
• I/O Board cable
• Network cable
• LVDS cable
• Audio cable
See Fig. 8 on page 31 for details
7. Unscrew one Hex Nut #8-32. Lift the Inner Box upwards to release the latches then rotate the
CPU box to gain access to the AC cable connector (see Fig. 6 on page 30 and Fig. 9 on page 32 for
details).
8. Disconnect the DC Harness from the CPU Box. Remove the CPU Box from themachine
(see Fig. 10 on page 32 for details).
9. Press onto the SD Memory card to eject it from the existing CPU Box. Insert the memory card
into the new CPU Box (see Fig. 11 on page 33 for details).
10. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
7
(1) HNS-CT09-723
(2) HNS-CT09-704
(3) HNS-CT09-716
(4) HNS-CT09-713
(5) HNS-CT09-727
(6) HNS-CT09-780
(7) HNS-CT09-730
Copyright © 2011 JVL Labs All Rights Reserved