IRiver H320 Manual page 60

C 7. G
HAPTER ENERAL
Bidirectional Scroll Limit: Rockbox has two different automatic horizontal scrolling
methods: 1) always scrolling the text to the left until the line has ended and
then beginning again at the start, and 2) moving to the left until you can read
the end of the line and then scrolling right until you see the beginning again.
Rockbox chooses which method it should use depending of how much it
has to scroll to the left. This setting lets you tell Rockbox where that limit is,
expressed in percentage of the line length.
Screen Scrolls Out of View: Screens can be manually scrolled horizontally by
pressing
entries at their fixed positions and allow them to be scrolled out of view,
whereas N
Screen Scroll Step Size: Defines the number of pixels the horizontal manual
screen scroll should move for each step.
Paged Scrolling: When set to Y
screen size will page up/down instead of simply changing lines. This can be
useful on slow displays.
Status/Scrollbar: Settings related to on screen status display and the scrollbar.
Scroll Bar: Enables or disables the scroll bar at the left.
Status Bar: Enables or disables the status bar at the upper side.
Volume Display: Controls whether the volume is displayed as a graphic or a
numeric value on the Status Bar. If you select a numeric display, volume
is displayed in decibels. See section
setting.
Battery Display: Controls whether the battery charge status is displayed as a
graphic or numerical percentage value on the Status Bar.
Peak Meter: The peak meter can be configured with a number of parameters.
Peak Release: This determines how fast the bar shrinks when the music be-
comes softer. Lower values make the peak meter look smoother. Expressed
in scale units per 10ms.
Peak Hold Time: Specifies the time after which the peak indicator will reset. For
example, if you set this value to 5s, the peak indicator displays the loudest
volume value that occurred within the last 5 seconds. Larger values are use-
ful if you want to find the peak level of a song, which might be of interest
when copying music from the player via the analogue output to some other
recording device.
Clip Hold Time: The number of seconds that the clipping indicator will be visible
after clipping is detected.
Clip Counter: Show the number of times the clip indicator went active during
recording in front of the peak meters.
Scale: Select whether the peak meter displays linear or logarithmic values. The
human ear perceives loudness on a logarithmic scale. If the Scale setting is
T R
HE OCKBOX MANUAL
S
ETTINGS
Long Right/Left. Setting this option to Y
will only scroll those entries which surpass the right margin.
O
ES
scrolling vertically on pages that surpass the
6.1 (page 46) for more on the volume
60
will keep the list
ES
I H3
RIVER XX