Hdmi ® Information Display; Displaying Tvstatus Information - Toshiba 32L2400U User Manual

Settingupyour TV 91
Displayi_ TVstatus inJormation
Mode
Auto(default)
Full
Limited
Press the •/• (arrow) buttons to select Auto, Full, or
Limited, and then press the ENTER button.
Description
AdjustsRGBfull range signalautomatically.
ROBin!_u!_s!gna!_o)S_a_ed !no_ang, e from 0 to 255.
RGBinputsignalis displayed in therange from 16 to 235.
The HDMV setting (RGB Range) needs proper HDMI
TM
source
devices. If your HDMI ®source device does not support these
features, the TV may not work properly when this feature is enabled.
HDMI ® Information D isplay
Viewing the HDMI ®signal information:
1 From the Options menu, highlight HDMI Information
Display, and then press the ENTER button.
2 Press the • / • (arrow) buttons to select On or Off, and then
press the ENTER button.
3 When the HDMI Information is set to On, pressing the INFO
button displays the HDMI Information banner (Resolution,
Scan Type, Frame Rate, Aspect, Bit Depth, Color Space, RGB/
YUV, Chrolna Format). When the HDMI Information is set to
Off, the normal banner is displayed.
NOTE ._,,Thesignalinformation banner w ill appear w henthis feature is set
to OnandyouwatchanHDMI ® inputandpress theINFO
button.Thesignalinformation will disappear afterapproximately
60 seconds.
¢ If youpress theINFObuttonwhenthis feature is setto Off,only
thenormal b anner will appear.
Displaying TVstatus information
To display TV status information using the RECALL button:
o!. Press the RECALL button on the remote control.
The following information will be displayed (if applicable):
o!. Current input (ANT/CABLE, Video, etc.)
o!. If ANT/CABLE is the current input, either"CABLE" (for cable
TV) or "ANT" (for over-the-air broadcasts).
o!. Channel number (if in ANT/CABLE mode)