Connecting A Digital Audio System - Toshiba 32L2400U User Manual

Connecting
Your TV
31
Connecting a digital a udio system
The TV's Digital Audio Out terminal outputs a Dolby@
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby@ Digital decoder or other
external audio system with optical audio input.
You will need an optical audio cable (Use an optical audio cable
that has the larger "TosLink _'_'' connector and not the smaller
"mini-optical" connector.)
TVback panel
_O-_] [elheDr i_itg_ladl eaCuddi_rs;rst em ] r _
t__2
(ScmTpleIllustnttion) 32/40/50L2 400_Connecting a dNital audio
system
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press the MENU button on the remote control and open the
Sound menu.
3 Press the 41/_ (arrow) buttons to select DigitalAudio Output
and then press the ENTER button.
4 Press the 41/_ (arrow) buttons to select either Auto or PCM,
depending on your device.
NOTE Some audiosystems maynotbecompatible with Dolby e > Digitalor
DTS ®bitstream signals.Olderaudiosystems thatarenotcompatible
withstandard opticaloutsignalsmaynotworkproperly, c reating a
highnoiselevel t hatmaydamage speakers or headphones. THIS
DAMAGE ISNOTCOVERED BYYOUR WARRANTY. TheDIGITAL
AUDIO OUT terminalmaynotoutputsomedigitalaudiosources
because ofcopyrestrictions.
***.The U olby @ Digitalor DTS formatisavailable in thefollowing
situations:
- When tunedtoa digitalRFchannel
- When an HDMI ® inputisused
- Whennetwork devices areused