Toshiba 32L2400U User Manual page 7

7
7) VESAMounting Pattern
TVSize HolePattern ( HxV) Screw Size
32" 200mm x 200mm M6
40" 2OOmm x 2OOmm M6
50" 4OOmm x 2OOmm M8
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a fiat,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2) Remove the stand screws shown in the diagram
below. This will allow removal of the pedestal stand.
3) Once you have removed the screws holding the
pedestal stand in place, remove the pedestal stand
from the TV.
32" TV. VESA MountingPattern
Two stand screws Hook for attaching
the strap
(as short as possible
(Sample Illustration)
40"TV.
VESA Mounting Pattern
I • Hookfor attaching
Four stand screws the strap
(as short as possible)
(Sample Illustration)
50" TV.
VESA Mounting Pattern
Four stand screws
the strap
(as short as possible)
(Sample Illustration)
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy strap
from the hook(s) on the rear of the TV to a wall stud,
)illar, or other immovable structure. Make sure the
strap is tight, secure, and parallel to the floor.