Clock; Kitchen Timer; Tones - Kenmore 911.41785 User Manual

OPERATION
Clockand Timer
The clock must be set for the correct
time of day before a delayed oven
function can work properly. The time
of day cannot be changed during a
timed oven function, but can be
changed during a bake or broil
function.
HOW TO SET THE CLOCK
1. Press the CLOCK pad.
2. Press the HOUR/MIN UP and/or
DOWN arrow pads to set the
time.
3. Press the START pad.
RECALL THE CLOCK
While using your oven for cooking,
press the CLOCK pad if you wish to
check the time of day. The current
time of day will show in the display
POWER FAILURE
If you have experienced a power
failure, the time will flash in the display
and will be incorrect Reset your
clock.
Any oven cooking function that was in
process will need to be reset.
The Kitchen Timer is used to time
cooking processes or other
household activities, it does not
control the oven. It can be set for up
to 9 hours and 59 minutes. It will
count down in minutes until the LAST
68 SECONDS is reached, then the
control will beep once. When the
countdown reaches ZERO, the
control will beep 3 times followed by
one beep every 6 seconds until the
KITCHEN TIMER ON/OFF pad is
pressed. The 6 second beep can be
removed for future cycles if desired.
For directions on removing this
continuous beep, see Tones on the
following page.
HOW TO SET THE TIMER
KITCHEN
1. Press the KITCHEN TIMER
ON/OFF pad.
2. Press HOUR/IMIN UP and/or
DOWN arrow pads to set time.
3. Press the START pad.
4.. When the countdown has reached
zero, press the KITCHEN
TIMER ON/OFF pad to turn off
the beep.
To cancel the timer during the
countdown, press the KITCHEN
TIMER ON/OFF pad TWICE
8