Kenmore 911.41785 User Manual page 18

OPERATION
SettingSpecial Features
Your control will allow you to lock the
touch pads so they cannot be activated
when pressed. If you're worried about
leaving the oven unsupervised, activate
this feature.
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF.
2. (a) Press the CLEAN pad. The
display shows LOC OFF (lockout
off).
(b) Press the CLEAN pad again.
The display will show LOC ON
(lockout on).
3. Press the START pad.
This feature can only be set
when the oven is not in use.
When this feature is on, the display will
show LOC, if a touch pad is pressed.
(This feature will not affect the clock,
timer, or oven light pads.)
This feature will automatically convert
the temperature you set for traditional
baking to convection cooking,
1, Press and hold the CONVECTION
BAKE pad for 4 to 5 seconds,
2. Press the TEMP UP or DOWN
ARROW pads to set the
temperature.
3, Press the START pad. You will see
the converted temperature in the
display. For example, if you entered
375° the display will show 350° This
conversion will need to be set each
time you use Convection Bake.
Your new control has a cook and hold
feature for timed cooking only that will
keep hot cooked foods warm up to 3
hours after the timed cooking is
finished. To activate this feature:
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF.
2. (a) Press the OVEN COOKING
TIME pad. The display will show
HLd OFF.
(b) Press the OVEN COOKING
TIME pad again to activate the
feature. The display wil! show HLd
ON
3. Press the START pad.
This special feature will allow you to
change the speed; #1 means speed of
change is slow up to #5 which means
speed of change is fast, To set the
speed you prefer, follow these steps:
1. Press and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows SF
2. Press the UP arrow pad. The
display will show the current set
speed.
3. Press the UP arrow to increase the
speed up to the number 5.
or
Press the DOWN arrow pad to
decrease the speed down to the
number 1.
4. Press the START pad.
18