Installation With A Router - VTech IP8100-2/81003 Manual

Setup

Installation With A Router

IP 8100-2/8100-3
Base Unit
IP 8100-2/8100-3
Handset 1 & 2
Warning: Do not route the ethernet cable to outdoors, and ensure that you are
using a safety approved ADSL or Cable modem with proper electrical isolation.
STEP 1 Using the Ethernet cable provided, connect one end into the WAN port
(with white marking) on the IP 8100-2/8100-3 broadband telephone,
and connect the other end into an available LAN port on your router.
STEP 2 Plug the power cord into the POWER port on the IP 8100-2/8100-3
and into an electrical outlet. This turns your IP 8100-2/8100-3 on.
NOTE: After IP 8100-2/8100-3 is powered on, update files will download. DO
NOT interrupt this registration process by unplugging the power or use
the IP 8100-2/8100-3 Handsets until the VoIP indicator light on the
front of IP 8100-2/8100-3 Base has gone from flashing yellow to a
steady green.
INTERNET
WAN Port
Existing
Network Router
11
DSL or Cable Modem
PC
Laptop