13. Attach the Left Crosswalk Arm (117) and a
Plastic Spacer (119) to the Left Upright (53) with
two 1/4" Flat Washers (114) and two 1/4" x 3"
Bolts (111). Make sure that the Left Crosswalk
Arm is on the indicated side of the Console
(91).
Attach the Right Crosswalk Arm (not shown)
in the same way. Be careful not to pinch the
wires in the Right Upright (not shown).
14. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys
in a secure place. One hex key is used to adjust the walking belt (see page 23). To protect the floor or carpet,
place a mat under the treadmill.
13
117
91
114
111
13
53
119