Image IMTL15905.0 User Manual page 23

HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the Incline Trainer near the power cord.
Plug the other end of the cable into the included
adapter. Plug the adapter into the LINE OUT jack
on your stereo.
A
Audio
Cable
B. Plug one end of the audio cable into the jack on the
front of the Incline Trainer near the power cord.
Plug the other end of the cable into the included
adapter. Plug the adapter into an RCA Y-adapter
(available at electronics stores). Next, remove the
wire that is currently plugged into the LINE OUT
jack on your stereo and plug the wire into the un-
used side of the RCA Y-adapter. Plug the RCA Y-
adapter into the LINE OUT jack on your stereo.
B
Audio
Cable
Wire removed from
LINE OUT jack
CD
VCR
Amp
LINE OUT
CD
LINE OUT
VCR
Amp
Adapter LINE OUT
LINE OUT
A
A
CD
VCR
Amp
LINE OUT
CD
VCR
Amp
LINE OUT
RCA
Y-adapter
Adapter
B
B
HOW TO CONNECT YOUR COMPUTER
Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the Incline Trainer near the power cord.
Plug the other end of the cable into the LINE OUT
jack on your computer.
A
B. Plug one end of the audio cable into the jack on the
front of the Incline Trainer near the power cord.
Plug the other end of the cable into a 3.5mm Y-
adapter (available at electronics stores). Plug the Y-
adapter into the PHONES jack on your computer.
Plug your headphones or speakers into the other
side of the Y-adapter.
B
Headphones/Speakers
23
LINE OUT
Audio
Cable
LINE OUT
A
A
PHONES
PHONES
Audio
3.5mm
Cable
Y-adapter
B
B